Carbon Fiber Parts

Carbon Fiber & Composite Parts

Custom Works has been producing fiberglass and carbon fiber parts for 2nd gen Camaros since 2004. We use and install ALL of our parts to ensure proper fit and quality.

Carbon Fiber Valve Covers

We now offer 100% carbon fiber valve covers. The covers are layed up using resin infusion to ensure a leak free seal and fit. Covers are extremely light weight and help reduce heat in the engine area. Most covers feature a screw on oil filler. Covers fit most roller rockers. click above for larger image

Small Block Chevy perimeter bolt- $375 Pair
Small Block Chevy center bolt- $375 pair
Big Block Chevy- $395 pair
LSx Style- NEW $499 Pair (coil brackets add $159 pair)

RS Nose with Integral Grill Shell

Our reproduction Rally Sport nose features a light weight fiberglass construction and a revised look. Our nose has the inner chrome grill shell of the original incorporated into the part as one piece. We have also smoothed the transition between the nose and grill area. Our nose replaces the stock urethane nose, chrome grill insert, and includes a lighweight center bar. This part bolts to the header panel using the mounts in the grill area, elimating the heavy brackets used to hold the factory nose in place. Stock plastic grills and rubber divider strip mount just like stock. Part weighs approx 5lbs, and eliminates approx 25 pounds off the nose of the car! Grey Geloat finish, hand layed fiberglass

70-73 RS Nose $459 - New Lower Price!

Carbon Fiber RS Bumperettes

Our RS bumperettes fit 70-73 RS or Standard front Camaros. These are hand layed carbon fiber parts bolt on just like the stock parts, but at a fraction of the weight at just 1 pound for the pair!
RS Bumperettes Pr. carbon fiber $345

RS Bumperettes Pr. fiberglass $159

70-73 Rear Bumper Carbon Fiber

Our rear bumpers look just like the factory part, but in light weight carbon fiber. Our part is designed to use the factory mounts, but we recomend bonding your brackets to the bumper for that clean smooth look. It weighs a mere 3 pounds! Features hand layed carbon fiber

70-73 rear bumper carbon fiber $375

70-73 rear bumper fiberglass $225

**Order front and rear carbon fiber bumper set for $699**

Carbon Fiber Radiator Cover 70-81 Camaro

This custom real carbon fiber radiator cover is designed to replace the stock piece on cars equipped with custom radiators and electric fans. It cannot be used with stock fan shroud. Part is sold as a universal fit design and may require some additional trimming and/or drilling. Available in Glossy or Satin finish. $139 carbon fiber or in plain gelcoat ready for paint $89 (side photo shown installed with Anvil closeout panel)

Stealth Ram Carbon Fiber Intake Plenum

This new plenum is designed to replace the upper intake plenum on your Holley Stealth Ram EFI Intake manifold. This part uses all your existing parts, and should fit where your pooring cast aluminum plenum once resided. This manifold will reduce intake temperatures, increase plenum volume by 40%, and weighs 1/3 the weight of the orginal piece. Our plenum is the same height as the original plenum, and is a direct replacement. Modifications may be necessary to your throttle linkage. This part is available in black composite, or carbon fiber (as pictured)

$650 in black composite

$1000 for carbon fiber (as pictured)

Datsun Z Car Tripple Carb Air box

Composite air box plumbs cold air into carbs with filter mounted outside engine compartment. Fits Solex and Weber triple carburetors. Fits most short and mid-length intakes, and clears brake booster. Mounts directly to carbs, and uses stock air bell even up to 2" Heat shield MUST be used between air box and header. Fits 3" intake tube (not included)
Air Box Assembly $650 Carbon fiber

$500 fiberglass

We Make Custom Sheet Panels Too!

We can make custom flat panels for you to make gauge panels or whatever your project requires. Flat panels come in sheet form just like aluminum or steel, and can be custom made to suit the needs of your project by size and rigidity. We can make panels as large as 24"x48" or smaller. Panels are sold by square foot, and are $15 for 1-4 sq' and $12 for 5 of more sq'. Finished thickness is approx .030 thick and suitable for most panels. We can make thicker if necessary. All panels come with high gloss finish. Call for custom cut to spec panels.

RS nose installed and painted, Installation completed by Customer - Click for larger image

Air box installed on Datsun 1970 240z with triple 45 webber carburetors

Notice about Carbon Fiber Composite Parts

Our carbon fiber parts are designed as lightweight replacement parts. The parts we cary are not D.O.T. approved for highway use, please check your local. State, and Federal laws before installation of these parts. Many of our carbon fiber parts are produced without a gelcoat finish, which may result in "print through" of the woven fabric on the surface of the part. Also small pin holes, or air bubbles can be found, they are present in ALL composite pieces, but usually hidden by a colored gelcoat. All of the carbon fiber parts with the Custom Works logo are produced by us, all of our composite parts are made in the USA, because it matters!